BPYGD - 1062 COSMOLINE
- MSDS: BPYGD
- Manufacturer: E F HOUGHTON AND CO
- Product Name: 1062 COSMOLINE
- National Stock Number: 9150-00-240-2235
Product Identification
Product ID:1062 COSMOLINE
MSDS Date:03/06/1987
FSC:9150
NIIN:00-240-2235
MSDS Number: BPYGD
Responsible Party
VALLEY FORGE, PA 19482
US
Emergency Phone: 215-666-4105
Info Phone: 215-666-4105
Preparer: ROBERT E. WILLIAMS
Cage: 73227
Contractor
Telephone: 610-666-4105
Cage: 73277
Ingredients
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9293
WAXES
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE; INHALATION OF HIGH
CONCENTRATIONS OF MISTS MAY CAUSE IRRITATION OF RESPIRATORY TRACT.
CONTACT WITH EYES MAY CAUSE IRRITATION. NON-TOXIC IF SWALLOWED.
CHRONIC: PROLONGED OR REPEATED CONTACT MAY CAUSE SKIN IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALED: COUGHING, SHORTNESS OF BREATH,
SNEEZING. EYES: REDNESS, TEARING, BLURRED VISION. SKIN: REDNESS,
RASH, DISCOMFORT. INGESTED: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:PERSONS WITH RESPIRATORY AILMENTS
MAY SHOW INCREASED SYMPTOMS FROM EXPOSURE.
First Aid
First Aid:INHALED: MOVE TO FRESH AIR. EYES: FLUSH WITH LOTS OF WATER
FOR 15 MINUTES, HOLD LIDS OPEN. SEE DOCTOR. SKIN: REMOVE
CONTAMINATED CLOTHES. WASH WITH SOAP AND WATER. INGESTED: DO NOT
INDUCE VOMITING. GE T MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:310F,154C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. TREAT
AS GREASE OR OIL FIRE.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB WITH INERT MATERIAL AND PLACE IN A
CONTAINER FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL-VENTILATED
AREA AWAY FROM SOURCES OF IGNITION AND STRONG OXIDIZING AGENTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. IF ENGINEERING CONTROLS
FAIL, USE NIOSH/MSHA APPROVED RESPIRATOR. USE IN ACCORDANCE WITH 29
CFR 1910.134.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:V6
Vapor Pres:<0.0001 MM
Vapor Density:>14(AIR=1)
Spec Gravity:0.9
Evaporation Rate & Reference:<1 (ETHYL ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK BROWN GREASE; BLAND ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:SOURCES OF IGNITION. CONTACT WITH STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.